From high-performance 802.11n Wi-Fi to outdoor mesh to wired-only devices, Aruba access points serve as on-ramps that aggregate user traffic onto the enterprise network. Working in conjunction with Aruba controllers, access points are “thin” devices that need no configuration, no software updates, and no management.
In addition to providing network access, wireless access points provide RF monitoring services for wireless networks. Aruba offers a broad portfolio of APs featured and priced to address the needs of mobile enterprise networks, from large campuses to small branch offices:
- Single and Dual Radio 802.11a/b/g/n
- Wireless and Wired Networks
- Indoor and Outdoor Usage
- Telecommuter Deployments
- Harsh Environment / Factory Floor Applications
- Mesh and Wireless Bridging Deployments
Aruba AP-120 Access Point Family
The AP-120 family of APs includes high-performance 802.11a/b/g and 802.11n Draft 2.0 access points that support 3×3 MIMO and operate from standard 802.3af Power over Ethernet. These APs are designed to fit cleanly into office environments, and provide wireless LAN access, air monitoring, spectrum analysis, and wireless intrusion detection and prevention.
Aruba AP-70 Dual-Radio, Multi-purpose 802.11 a/b/g Access Point
Ideally suited for advanced service delivery in mission-critical networks, the AP-70 includes dual-Ethernet ports and a USB port for 3G WAN backhaul (when configured as a Remote Access Point).
Aruba AP-65 – Dual-Radio 802.11a/b/g Access Point
The AP-65’s self contained, low-profile design is ideally suited for office deployments and any area where a compact unobtrusive form factor is desirable.
Aruba AP-65WB – Dual-Radio Access Point
(designed for standard US double-gang electrical wall box)
The AP-65WB is ideal for hotels, student housing, hospitals, and other areas where unobtrusive mounting is required. Builders can install the AP-65WB throughout new-construction office buildings, preparing them for a future wireless deployment.
Aruba AP-60 and AP-61 Single-Radio, Multi-Band (802.11a/b/g)
The AP-60 and AP-61 are ideal for dense AP deployments where only single-band coverage is desired. The AP-60 and AP-61 are also commonly deployed as an indoor mesh bridge.
Aruba AP-85FX/LX and AP-85TX Access Points
The AP-85 family of ruggedized APs are ideal for outdoor use and harsh environments. Equipped with dual high-power radios, the APs feature over-the-air configuration, low and high voltage power operations (including battery operation), and a weather-tight, wide-temperature design certified for use in hazardous environments.
Aruba Access Concentrators
Aruba’s Access Concentrators are designed to transport network traffic from multiple user ports across an IP network to an Aruba Multi-Service Controller using Aruba’s “virtual edge” architecture. At the controller, security services are applied to all user sessions.
Access Concentrators are available in three sizes to accommodate a variety of requirements.