Extricom EXRP Access Points

extricom

EXRP Access Points

Extricom’s UltraThin Access Points are high-bandwidth network devices, containing multiple standard 802.11 radios. Extricom APs are “UltraThin” because they have no software, and require no configuration. This makes them fully interchangeable, enabling truly plug-and-play installation. APs are connected to the Extricom WLAN Switch via standard Cat5e/6 cables.

With all intelligence residing in the Switch, APs may be placed as close together as necessary to provide high-quality, high-speed connectivity from all locations within the enterprise. In this respect, the Extricom deployment philosophy is similar to that of wired networks: simply place APs wherever service is required, based solely on the grade services desired (i.e. connection rate), without any of the interference, channelization, or coverage/capacity constraints seen in traditional WLANs.

prod_exrp_40 EXRP-20 Two-Radio UltraThin AP
The EXRP-20 uses two IEEE 802.11 a/b/g radios to power dual Channel Blankets. The EXRP-20 can be deployed in any density, with simple mounting and no external power sources needed.
 prod_exrp_40  EXRP-40 Four-Radio UltraThin AP
The EXRP-40 is an industry-first four-radio access point, containing four IEEE 802.11 a/b/g radios which can operate on any combination of four non-overlapping channels in any band. The EXRP-40 brings unmatched capabilities, including a quadrupling of capacity, predictable Quality of Service, and the flexibility to fully leverage all channels in the 2.4GHz and 5GHz bands.
prod_exrp_30n  EXRP-30n Three-Radio UltraThin 802.11n AP
The three-radio EXRP-30n is an 802.11n access point with integrated antennas, for easy deployment of ‘n’ on a large scale. The EXRP-30n is equipped with two n/g/b/a radios and one g/b/a radio, which can be operated in any combination of channels and bands. All ‘n’ equipped radios incorporate 3×3 MIMO antenna configuration.
prod_exrp_20e  EXRP-20E Two-Radio UltraThin AP
The EXRP-20E uses two IEEE 802.11 a/b/g radios to power dual Channel Blankets. The EXRP-20E is plenum-rated and equipped with four RP-SMA connectors for connecting external diversity antennas to support a variety of deployment scenarios.
prod_exrp_40e  EXRP-40E Four-Radio AP
The EXRP-40E contains four IEEE 802.11 a/b/g radios which can operate on any combination of four non-overlapping channels in any band. The EXRP-40E is plenum-rated and equipped with eight RP-SMA connectors for connecting external diversity antennas to support a variety of deployment scenarios.
prod_exrp_40en
 EXRP-40En Four-Radio UltraThin 802.11n AP
The industry’s only quad-radio 802.11n AP, incorporating two n/a/b/g radios and two a/b/g radios, which can be operated in any combination of channels and bands. All ‘n’ equipped radios incorporate 3×3 MIMO (multiple-in, multiple-out) antenna configuration. The EXRP-40En is plenum-rated and equipped with ten RP-SMA connectors for connecting external diversity antennas.